Cancoil Thermal Corporation

Heat Transfer Solutions Built to a Higher Standard

Model ELP Low Profile Unit Cooler

| Image 1 of 2 |
CANCOIL Model ELP unit coolers are designed to deliver maximum heat transfer capacity with a limited amount of space, and are often found in restaurants, convenience stores and supermarkets. Generous amounts of coil surface and air flow assure the required temperature and humidity conditions are maintained.  Units are designed for efficient operation between -20ºF and +35ºF room temperature.  Units designed for applications below -20ºF are also available.

Defrost heaters have been carefully selected to provide optimum defrost characteristics for the coil and the drain pan. Factory set defrost termination, fan delay and heater safety thermostats provides trouble free operation.

Model ELP is suitable for use with environmentally friendly refrigerants.  Please contact our sales department for further information.

DATASHEETS

FEATURES
  • Truly low profile - only 15 inches high
  • Long-life stucco textured aluminum cabinet;
    stainless steel cabinets available
  • Full collar, continuous plate type aluminum fin/copper tube coils provide efficient heat transfer surface
  • Fin spacing is 6 FPI; optional FPI available
  • 12 inch diameter fans provide up to 20 ft air throw
  • Thermally protected fan motors
  • Efficient PSC and ECM motors are available
  • Fan motors located within unit cabinet
  • All units are interchangeable fan motors, blades and guards
  • Moisture-tight wiring harness with quick connect motor plugs
  • Single electrical connection for all motors
  • Space inside unit cabinet for expansion valve mounting
  • All units are designed for use with externally equalized TXV or electronic expansion valve
  • Incoloy/Stainless tubular defrost heaters
  • Factory set defrost termination, fan delay thermostat, and heater safety control
  • Heaters embedded into full collar slots provide efficient defrost
  • Standard models are UL and NSF listed and CSA certified

Cancoil Thermal Corporation

John F. Scott Rd., Kingston, Ontario, K7L 4V3
Tel: 1-800-471-8281, Tel: (613) 541-1235, Fax: (613) 541-1239
sales@can-coil.com or for US customers sales@cancoilusa.com
AHRI UL CSA NSF ISO 9001:2008
Copyright © 2011. Cancoil Thermal Corporation. All Rights Reserved.