Cancoil Thermal Corporation

Heat Transfer Solutions Built to a Higher Standard

Model GLP/RLP Low Profile Unit Coolers

| Image 1 of 2 |
CANCOIL Model GLP/RLP unit coolers are designed to deliver maximum heat transfer capacity within a limited amount of space. Generous amounts of coil surface and air flow assure the required temperature and humidity conditions are maintained. Units are designed for efficient operation between ‑20ºF and +35ºF room temperature. Units designed for applications below -20ºF are also available.

Factory piping of defrost components minimizes field installation costs. Units available for use with reverse cycle or three pipe system:

  • Specify Model RLP for reverse cycle systems
  • Specify Model GLP for three-pipe systems

Model GLP/RLP is suitable for use with environmentally friendly refrigerants.  Please contact our sales department for further information.

DATASHEETS

FEATURES
  • Truly low profile, only 15 inches high
  • Long life stucco textured aluminum cabinet;
    stainless steel cabinets available
  • Full collar, continuous plate type aluminum fin/copper tube coils provide efficient heat transfer surface
  • Corrosion-resistant hardware to prevent discoloration
  • Fin spacing is 6 FPI; optional FPI available
  • 12 inch diameter fans provide up to 20 ft air throw
  • Hot gas loop in drain pan provides positive drainage without danger of drain pan freeze-up, while allowing removal of drain pan for ease of cleaning.
  • Factory set defrost termination and adjustable fan delay thermostat
  • Space inside unit cabinet for expansion valve mounting
  • All units designed for use with externally equalized TXV or electronic expansion valve
  • Moisture-tight wiring harness with quick connect motor plugs
  • Single electrical connection for all motors
  • Thermally protected fan motors
  • Efficient PSC and ECM motors available
  • Fan motor located within cabinet
  • All units use interchangeable fan motors, blades and guards
  • Standard models are UL and NSF listed and CSA certified

Cancoil Thermal Corporation

John F. Scott Rd., Kingston, Ontario, K7L 4V3
Tel: 1-800-471-8281, Tel: (613) 541-1235, Fax: (613) 541-1239
sales@can-coil.com or for US customers sales@cancoilusa.com
AHRI UL CSA NSF ISO 9001:2008
Copyright © 2011. Cancoil Thermal Corporation. All Rights Reserved.