Cancoil Thermal Corporation

Heat Transfer Solutions Built to a Higher Standard

Model WCU Water Cooled Condensing Unit

CANCOIL Model WCU condensing units are designed for closed loop, indoor commercial and industrial refrigeration and air conditioning applications. These high quality units feature generously sized condenser/ receivers selected for optimum performance and efficiency. Units may be used  along with chilled water loops, outdoor fluid coolers or cooling towers.

Refrigeration models include the features and options necessary for high, medium or low temperature refrigeration and may be matched with Cancoil's complete line of unit coolers.

Model WCUs are available in sizes 5 to 60 HP for air conditioning, high and medium temperature applications, and 4 to 31 HP for low temperature applications. Semi-Hermetic and scroll compressors are available. Model WCU is suitable for use with environmentally friendly refrigerants.  Please contact our sales department for further information.

DATASHEETS

STANDARD FEATURES
  • Heavy gauge galvanized steel base mount design, ideal for rack installation
  • Condenser/receiver sized for ample pump down capacity, factory mounted and piped with service valves
  • Factory installed and piped liquid line sight glass, filter/drier, and shut off valve
  • Factory installed and piped discharge and suction line vibration isolator
  • Suction accumulator
  • Factory installed and piped suction filter
  • Crankcase heater, factory installed and wired

OPTIONS

  • Heat exchanger suction accumulator
  • Capacity control by compressor unloading (Semi-Hermetic models)
  • Capacity control by hot gas bypass
  • Anti-short-cycling timer
  • Compressor part winding start
  • Oil separator
  • Water regulating valve (ship loose)

  • Factory wired and tested control panel includes:
    • Non-fused main disconnect
    • Compressor contactor
    • Evaporator fan motor contactor as required
    • Defrost heater contactor as required
    • Hi/Lo pressure control
    • Oil pressure safety control (semi hermetic models)
    • Defrost timer as required
    • Pump down service switch
    • Evaporator fan motor fusing, as required

    Cancoil Thermal Corporation

    John F. Scott Rd., Kingston, Ontario, K7L 4V3
    Tel: 1-800-471-8281, Tel: (613) 541-1235, Fax: (613) 541-1239
    sales@can-coil.com or for US customers sales@cancoilusa.com
    AHRI UL CSA NSF ISO 9001:2008
    Copyright © 2011. Cancoil Thermal Corporation. All Rights Reserved.