Cancoil Thermal Corporation

Heat Transfer Solutions Built to a Higher Standard

Electric Defrost Unit Coolers

Reach-In Unit Coolers

Trim-Rear Discharge - ETR  


Walk-In Unit Coolers

Low Velocity - ELV Low Profile - ELP
Medium Profile - EMP High Profile - EHP

Cancoil Electric Defrost Unit Coolers are designed for use in refrigerated spaces where a positive means of frost removal is required. They feature generous amounts of coil surface and airflow to assure that refrigerated air is properly distributed throughout the space.

Reach-In models are designed specifically to maximize the storage available in commercial refrigerators.

  • Specify Model ETR for top mount rear air discharge

Walk In models are designed for refrigerated rooms and warehouses.

  • Specify Model ELV for low air velocity for rooms down to
    28 deg F
  • Specify Model ELP for air throw up to 20 ft and room temperatures down to -20 deg F
  • Specify model EMP for air throw up to 48 ft and room temperatures down to -20 deg F
  • Specify Model EHP for air throw up to 90 ft and room temperatures down to -20 deg F

Of course these products can be modified should the design requirement be more demanding. Contact our sales department for further information.

Cancoil Thermal Corporation

John F. Scott Rd., Kingston, Ontario, K7L 4V3
Tel: 1-800-471-8281, Tel: (613) 541-1235, Fax: (613) 541-1239 or for US customers
Copyright © 2011. Cancoil Thermal Corporation. All Rights Reserved.