Cancoil Thermal Corporation

Heat Transfer Solutions Built to a Higher Standard

Model EMP Medium Profile Unit Cooler

 

CANCOIL Model EMP is designed for use in refrigerated rooms maintained at  temperatures from -20ºF to +35ºF. These units are ideally suited for larger walk-in freezers, and are frequently found in supermarkets and warehouses. Generous coil surface is a design feature common to all EMP unit coolers. Air intake is through the coil face and discharge at the fans. The units may be secured to ceiling or suspended from rod hangers. Direct drive propeller fans driven by energy efficient ½ HP motors are statically and dynamically balanced for quiet operation.

Defrost heaters have been carefully selected to provide optimum defrost characteristics for the coil and the drain pan. Factory set defrost termination, fan delay and heater safety thermostats provides trouble free operation.

Units designed for applications below -20ºF are also available. Model EMP is suitable for use with environmentally friendly refrigerants.  Please contact our sales department for further information.

DATASHEETS

FEATURES
  • Sturdy textured aluminum cabinet for good appearance and durability; stainless steel cabinets available
  • Corrosion-resistant hardware to prevent discoloration
  • Full collar, continuous plate type aluminum fin/copper tube coils provide efficient heat transfer surface
  • Fin spacing is 6 FPI; optional FPI available
  • 20 inch diameter fans provide air throw up to 48 ft
  • Factory set defrost termination, fan delay thermostat and heater safety control
  • Incoloy/Stainless tubular defrost heaters
  • Heaters embedded into full collar slots provide efficient defrost
  • Totally enclosed, thermally protected, energy efficient ½ HP fan motors
  • All units use interchangeable fan motors, blades and guards
  • Space inside unit cabinet for expansion valve mounting
  • Suction line pressure tap provided for convenience in setting expansion valve
  • Standard models are UL listed and CSA certified

Cancoil Thermal Corporation

John F. Scott Rd., Kingston, Ontario, K7L 4V3
Tel: 1-800-471-8281, Tel: (613) 541-1235, Fax: (613) 541-1239
sales@can-coil.com or for US customers sales@cancoilusa.com
AHRI UL CSA NSF ISO 9001:2008
Copyright © 2011. Cancoil Thermal Corporation. All Rights Reserved.