Cancoil Thermal Corporation

Heat Transfer Solutions Built to a Higher Standard

Model ACU Air Cooled Condensing Unit

| Image 1 of 3 |

CANCOIL Model ACU Condensing Units are designed to provide rugged performance and optimum efficiency in a variety of commercial and industrial refrigeration appications.

ACU models may be matched with Cancoil Unit Coolers to provide a variety of high, medium and low temperature systems. They may also be matched with a variety of third party chillers and air-handlers to provide custom refrigeration systems.

CANCOIL ACU's are available in sizes from 5 to 120 HP for air-conditioning, high and medium temperature applications and 4 to 60 HP in low temperature applications. Units are available with single or dual refrigeration circuits using semi-hermetic or scroll compressors.

Model ACU is suitable for use with environmentally friendly refrigerants.  Please contact our sales department for further information.

DATASHEETS

REFRIGERATION STANDARD FEATURES AIR CONDITIONING STANDARD FEATURES
  • Generous copper tube aluminum fin condenser surface for efficient system operation
  • Semi-Hermetic or scroll compressor, single or dual circuit available
  • Sub-cooling circuit on the air cooled condenser provides additional heat transfer surface
  • Heavy gauge galvanized steel cabinet
  • Liquid receiver factory mounted and piped with service valves; heated/ insulated receiver available
  • Factory installed and piped liquid line sight glass, filter/drier, and shut off valve
  • Additional sight glass at sub-cooler inlet for proper charging
  • Factory installed and piped discharge and suction line vibration isolator (Semi-Hermetic units)
  • Suction accumulator
  • Factory installed and piped suction filter
  • Factory wired and tested control panel includes:
    • Non-fused main disconnect
    • Compressor and condenser fan motor contactor
    • Evaporator fan motor contactor as required
    • Defrost heater contactor as required
    • Hi/Lo pressure safety control
    • Oil pressure safety control (on models with oil pumps)
    • Defrost timer as required
    • Adjustable condenser fan cycling thermostat
    • Pump down and service switch
    • Condenser fan motor fusing
    • Evaporator fan motor fusing, as required
  • Crankcase heater, factory installed and wired
  • Flooding type head pressure control
  • Generous copper tube aluminum fin condenser surface for efficient system operation
  • Semi hermetic of scroll compressor, single or dual circuit
  • Heavy gauge galvanized steel cabinet
  • Factory piped discharge line vibration isolator
    (Semi-Hermetic units)
  • Factory wired and tested control panel includes:
  • Non-fused main disconnect
  • Compressor and condenser fan motor contactor
  • Hi/Lo pressure control
  • Oil pressure safety control
  • Pump down and service switch
  • Condenser fan motor fusing
  • Adjustable condenser fan cycling thermostat
  • Crankcase heater, factory installed and wired

OPTIONS - All Models

  • Suction accumulator with built in heat exchanger
  • Capacity control by compressor unloading
    (Semi-Hermetic models)
  • Capacity control by hot gas bypass
  • Adjustable pressure activated fan cycling
  • Anti-short-cycling timer
  • Part winding start
  • Oil Separator
  • Aluminum or stainless steel cabinet
  • Copper fin coil
  • Corrosion resistant fin coatings
  • And more: please contact our sales department for further information

Cancoil Thermal Corporation

John F. Scott Rd., Kingston, Ontario, K7L 4V3
Tel: 1-800-471-8281, Tel: (613) 541-1235, Fax: (613) 541-1239
sales@can-coil.com or for US customers sales@cancoilusa.com
AHRI UL CSA NSF ISO 9001:2008
Copyright © 2011. Cancoil Thermal Corporation. All Rights Reserved.